Machining

Viscount Mining Reports Reconfirming Geophysical and Geochemical Results at Silver Cliff

Retrieved on: 
Tuesday, May 18, 2021
Industrial processes, Drilling, Machining, Woodworking, Milling, Oil well, Crafts, Economy

Five surface rock samples were collected in the survey area and the silver concentrations ranged from 31.1 to 280 g/t.

Key Points: 
  • Five surface rock samples were collected in the survey area and the silver concentrations ranged from 31.1 to 280 g/t.
  • Viscount drilled one hole in the survey area during the 2020 campaign.
  • Three core holes from the 2021 spring drilling campaign, completed in April, are located within the area of geophysical analysis.
  • Based on the accumulated data and a feasibility study, Tenneco Minerals made the decision to construct a $35,000,000 milling operation for the extraction of the silver reserves at Silver Cliff.

Fireweed Intersects 11.00% Zinc, 8.74% Lead and 19.6 g/t Silver over 8.2 m at Tom West

Retrieved on: 
Friday, May 14, 2021
Articles, Physical sciences, Chemistry, Machining, Construction, Drill, Tools, Zinc, holE, Golf course

In 2020, a small number of RC test holes were drilled as infill and twin holes at the Tom and Jason deposits.

Key Points: 
  • In 2020, a small number of RC test holes were drilled as infill and twin holes at the Tom and Jason deposits.
  • Hole TRC20-002 was an RC twin of an historic EX diamond drill hole, TS020.
  • Zinc grades are very similar but lead and silver grades are significantly higher in TRC20-002 compared to historic hole TS020.
  • Silver is reported in this news release by method AQ270, and zinc and lead are reported by LF725 or LF726.

Karora Extends New Larkin Zone to Over 650 Metres with Strong Infill and Step-out Drilling, Including 7.6 g/t Gold over 5.8 Metres

Retrieved on: 
Wednesday, May 12, 2021
Geology, Earth sciences, Structural geology, Drilling, Machining, Woodworking, Ultramafic rock, Fault, Physical sciences

The results form part of an infill and step-out drilling program designed to convert the Larkin Zone discovery (see Karora news release dated September 10, 2020) into Mineral Resources.

Key Points: 
  • The results form part of an infill and step-out drilling program designed to convert the Larkin Zone discovery (see Karora news release dated September 10, 2020) into Mineral Resources.
  • "\nThe Larkin Zone is interpreted as the faulted southern offset of the Western Flanks zone (Figure 1).
  • Drill results have now confirmed mineralization over 500 metres along strike and 120 metres below the ultramafic/basalt contact (down dip).
  • The 1940 face samples extend the Larkin Zone 150 metres north of reported drill results for a total strike length of 650 metres.

Golden Tag Intersects 286.02 g/t Ag.Eq Over 18.43 m and Identifies Mineralized Skarn Shoots 265 m above Fernandez Zone

Retrieved on: 
Thursday, May 6, 2021
Drilling, Machining, Woodworking, Oil well, Inventions, Economy, Science and technology

Reviewing these results and our overall model with Orix Geoscience has the Company encouraged that this geologic discovery could potentially be repeated in other areas over the Fernandez Zone.

Key Points: 
  • Reviewing these results and our overall model with Orix Geoscience has the Company encouraged that this geologic discovery could potentially be repeated in other areas over the Fernandez Zone.
  • Particularly prospective is the eastern side of Fernandez, and the mineralization associated within the Montanez Zone.\xe2\x80\x9d\nA total of 4,510 m of diamond drilling has been completed in eight holes.
  • Results from holes 20-51, 21-52A and 21-53 were reported in the Company\xe2\x80\x99s news release from April 14, 2021.
  • This second zone contains a richer brecciated zone of green and brown garnet exoskarn which yielded 18.43 m @ 286.02 g/t Ag.Eq (370.47 to 388.90 m).

Protolabs to Host Virtual Investor Day on May 20, 2021

Retrieved on: 
Thursday, May 6, 2021
Software, Other Manufacturing, Electronic design automation, Engineering, Chemicals, Plastics, Technology, Manufacturing, Other Technology, Industrial design, Secondary sector of the economy, Economic sectors, 3D printing, Industrial processes, Fused filament fabrication, Articles, Emerging technologies, Protolabs, Numerical control, Injection moulding, Machining

b"Protolabs (NYSE: PRLB) announced today that it will host an Investor Day virtually on Thursday, May 20, 2021.

Key Points: 
  • b"Protolabs (NYSE: PRLB) announced today that it will host an Investor Day virtually on Thursday, May 20, 2021.
  • To access and register for the event, please use this link .\nA live webcast and audio archive of the presentation will be available via the Investor Relations section of Protolabs\xe2\x80\x99 website.
  • The technology-enabled company produces custom components in as fast as 1 day with automated 3D printing, CNC machining, sheet metal fabrication, and injection molding processes.
  • Its digital approach to manufacturing enables accelerated time to market, reduces manufacturing costs, and enables supply chain agility throughout the product life cycle.

Fralock Holdings Acquires Ceramic Tech Inc.

Retrieved on: 
Tuesday, May 4, 2021
Ceramic, Machining

b'VALENCIA, Calif., May 4, 2021 /PRNewswire/ --Fralock Holdings, LLC, (an Arsenal Capital Portfolio Company) a leading developer and manufacturer of engineered solutions for critical applications, today announced the acquisition of Ceramic Tech Incorporated (CTI), an end-to-end ceramic solutions provider whose capabilities include specialized formulations, pre-fired machining, Sintering, pressing and grinding for the world\'s largest Original Equipment Manufacturers (OEM).

Key Points: 
  • b'VALENCIA, Calif., May 4, 2021 /PRNewswire/ --Fralock Holdings, LLC, (an Arsenal Capital Portfolio Company) a leading developer and manufacturer of engineered solutions for critical applications, today announced the acquisition of Ceramic Tech Incorporated (CTI), an end-to-end ceramic solutions provider whose capabilities include specialized formulations, pre-fired machining, Sintering, pressing and grinding for the world\'s largest Original Equipment Manufacturers (OEM).
  • Their stellar reputation made the combined companies an ideal acquisition choice for Fralock Holdings.\n"CTI is renowned in the semiconductor industry for its rapid prototyping and large format capabilities," said Marc Haugen, CEO, Fralock Holdings.
  • "\nThe acquisition adds over 30 new associates, building upon Fralock Holdings\' deep technical expertise and bench strength.\nEstablished in 1967, Fralock Holdings (an Arsenal Capital Portfolio Company) is a design, engineering and manufacturing company that develops high-performance solutions for Fortune 500 corporations in aerospace, defense, medical, life science, semiconductor technology and other high reliability markets.
  • Its family of companies include Fralock, Career Technologies USA, Mapson Engineering, Oasis Materials and Ceramic Tech Incorporated.\nHeadquartered in Valencia, California, Fralock employs over 500 associates in offices throughout California.\nCeramic Tech, Inc. was founded in 1989 by Kanu Gandhi and facilitates the manufacturing and fabrication of formulation, pressing, pre-fired machining, centering and grinding.

Colibri Option Partner Tocvan Ventures Corp Reports Gold Recovery of 92% from Pilar and Provides Update on Drilling Progress

Retrieved on: 
Tuesday, May 4, 2021
Drilling, Machining, Woodworking, Oil well, Science and technology, Inventions, Economy

b'Tocvan also reports that it has completed 1,394 m in 8 holes of a planned 2,400 metres drill program at Pilar.

Key Points: 
  • b'Tocvan also reports that it has completed 1,394 m in 8 holes of a planned 2,400 metres drill program at Pilar.
  • Drilling to date has focused on extension of the Main Zone.
  • Drilling in the current campaign will also test new targets in the 4-Trench Extension, North-Hill and Triple Vein Zone areas.
  • The flagship Evelyn Gold Project is 100% owned and explored by Colibri.

Essentium Takes 3D Printing to New Horizons with Partners and Customers

Retrieved on: 
Monday, May 3, 2021
Industrial design, Industrial processes, Computer printers, DIY culture, Emerging technologies, Articles, Secondary sector of the economy, 3D printing, Economic sectors, Machining

Previously, Mercury used a taping method, which was time-consuming and created bottlenecks in the manufacturing process.

Key Points: 
  • Previously, Mercury used a taping method, which was time-consuming and created bottlenecks in the manufacturing process.
  • Using the Essentium High Speed Extrusion (HSE) 3D Printing Platform and Essentium\'s TPU 74D-Z, Mercury was able to design, iterate, and print enough boots for production use in one day, decreasing lead-time by nearly 85%.
  • Working with customers and partners, we will continue to introduce new AM materials that unlock enormous speed, economic and innovation advantages for the aerospace and defense industry.
  • Essentium manufactures and delivers innovative industrial 3D printers and materials, enabling the world\'s top manufacturers to bridge the gap between 3D printing and machining and embrace the future of additive manufacturing.Essentium, Inc. is ISO 9001:2015 and ITAR certified.\n'

Superior Drilling Products to Report First Quarter 2021 Financial Results and Host Conference Call on May 12

Retrieved on: 
Monday, May 3, 2021
Other Energy, Oil, Gas, Natural Resources, Other Manufacturing, Energy, Other Natural Resources, Mining, Minerals, Manufacturing, Drilling, Machining, Woodworking, Well drilling, Drill, Economic sectors, Articles, Science and technology

b'Superior Drilling Products, Inc. (NYSE American: SDPI) (\xe2\x80\x9cSDP\xe2\x80\x9d or \xe2\x80\x9cCompany\xe2\x80\x9d), an innovator and manufacturer of drilling tool technologies, today announced that it will release its first quarter 2021 financial results before the opening of financial markets on Wednesday, May 12, 2021.\nThe Company will host a conference call and webcast that day to review the financial and operating results for the quarter and discuss its corporate strategy and outlook.

Key Points: 
  • b'Superior Drilling Products, Inc. (NYSE American: SDPI) (\xe2\x80\x9cSDP\xe2\x80\x9d or \xe2\x80\x9cCompany\xe2\x80\x9d), an innovator and manufacturer of drilling tool technologies, today announced that it will release its first quarter 2021 financial results before the opening of financial markets on Wednesday, May 12, 2021.\nThe Company will host a conference call and webcast that day to review the financial and operating results for the quarter and discuss its corporate strategy and outlook.
  • A question-and-answer session will follow.\nInternet Webcast and accompanying slide presentation: www.sdpi.com\nA telephonic replay will be available from 1:00 p.m. MT (3:00 p.m.
  • SDP drilling solutions include the patented Drill-N-Ream\xc2\xae well bore conditioning tool and the patented Strider\xe2\x84\xa2 oscillation system technology.
  • SDP operates a state-of-the-art drill tool fabrication facility, where it manufactures its solutions for the drilling industry, as well as customers\xe2\x80\x99 custom products.

Maple Gold Completes Winter Drill Campaign at Douay; First Hole at Douay West Zone Intersects 3.80 g/t Gold over 15 Metres and 2.98 g/t Gold over 5 Metres

Retrieved on: 
Thursday, April 29, 2021
Drilling, Machining, Woodworking, Oil well, Drill, Science and technology, Economy, Economic sectors

"\nMatthew Hornor, President and CEO of Maple Gold, stated: "We are pleased to have achieved the JV\'s original target of approximately 10,000 metres during this winter drill campaign despite COVID- and weather-related challenges, and to have the first drill hole return such promising results.

Key Points: 
  • "\nMatthew Hornor, President and CEO of Maple Gold, stated: "We are pleased to have achieved the JV\'s original target of approximately 10,000 metres during this winter drill campaign despite COVID- and weather-related challenges, and to have the first drill hole return such promising results.
  • Our winter campaign was designed in close collaboration with our JV partner with the aim of expanding resources at Douay and we anticipate seeing more positive results from the program in the weeks to come.
  • "\nThe Winter 2021 drill program was designed to expand the existing Douay mineral resource by both step-out and discovery drilling as well as to upgrade resources with several infill holes.
  • For more information, please visit www.maplegoldmines.com .\nON BEHALF OF MAPLE GOLD MINES LTD.\nFor Further Information Please Contact:\n'