Inductively coupled plasma mass spectrometry

Appia Reports New Assay Results Increasing the Total Weighted Average to 2,287 PPM TREO Across 57 RC Drill Holes at its PCH Ionic Clay Project, Brazil

Retrieved on: 
Thursday, November 9, 2023

Table #2 — Denotes weighted average chemical assay results of composites RC samples from PCH-RC-018 to PCH-RC-042.

Key Points: 
  • Table #2 — Denotes weighted average chemical assay results of composites RC samples from PCH-RC-018 to PCH-RC-042.
  • To view an enhanced version of this graphic, please visit:
    Table #3 — Denotes weighted average chemical assay results of composites RC samples from PCH-RC-043 to PCH-RC-063.
  • For a full listing of drill hole collar details - SIRGAS 2000 - UTM zone 22S.
  • The PCH Project is located within the Tocantins Structural Province in the Brasília Fold Belt, more specifically, the Arenópolis Magmatic Arc.

Calibre Intercepts High-Grade Gold Below the Jabali Mine and Resource and Identifies Three Additional Gold Targets All Within 10 km of the Libertad Mill; Initial Jabali Results Include 10.80 g/t Gold Over 14.3 Metres and 8.44 g/t Gold Over 8.9 Metres

Retrieved on: 
Tuesday, October 31, 2023

High-grade gold from underground drilling, approximately 100 metres below the main Jabali resource, confirms mineralization and continuity down-dip with strong potential for resource expansion.

Key Points: 
  • High-grade gold from underground drilling, approximately 100 metres below the main Jabali resource, confirms mineralization and continuity down-dip with strong potential for resource expansion.
  • Additionally, scout level drilling across the property has identified three new target areas located within 10 km of the Libertad mill.
  • First pass results shown in the Figures linked below demonstrate the potential for additional, near surface gold resources.
  • Initial drill results, along the same trend as the recently announced Volcan open pit resource, demonstrate strong potential to expand resources and discover new zones.

Appia Reports Extraordinary Assay Drill Results From Its PCH Ionic Clay Project, Brazil

Retrieved on: 
Tuesday, October 31, 2023

"This extraordinary RC hole confirms the extension of the initial Target IV area to the West and has increased the average thickness and total depth of the highly mineralized PCH ionic clay horizon," said Stephen Burega, President.

Key Points: 
  • "This extraordinary RC hole confirms the extension of the initial Target IV area to the West and has increased the average thickness and total depth of the highly mineralized PCH ionic clay horizon," said Stephen Burega, President.
  • "The assay results from PCH-RC-063 are highly promising, revealing sustained mineralization of essential elements including Terbium (Tb), Dysprosium (Dy), Neodymium (Nd), and Praseodymium (Pr).
  • Notably, several elements surpassed the upper detection limit of the assay method being used, and updated results will be reported once received."
  • Appia will provide timely updates to shareholders and the general public as assay results are received from the remaining 129 RC, 106 Auger, and 1 diamond drill holes.

Appia Reports Remarkable Drilling Results; Doubles Depth of Mineralized Zones at the PCH Ionic Clay Project, Brazil

Retrieved on: 
Monday, October 16, 2023

Average depth doubled: The average depth of RC drilling is over 13 metres from surface representing a significant doubling in average depth of the mineralized zones.

Key Points: 
  • Average depth doubled: The average depth of RC drilling is over 13 metres from surface representing a significant doubling in average depth of the mineralized zones.
  • To view an enhanced version of this graphic, please visit:
    For a complete listing of all assay results, please click here .
  • The PCH Ionic Clay Project drilling has resulted in 17 holes with a weighted average value of 1,566 ppm TREO, which is comparable to, or surpasses, other well-known international deposits.
  • Target IV marks a significant milestone for Appia's PCH Ionic Clay project, and the Company eagerly anticipates receiving further assay results from the SGS Geosol labs.

Appia Reports Remarkable Drilling Results; Doubles Depth of Mineralized Zones at the PCH Ionic Clay Project, Brazil

Retrieved on: 
Monday, October 16, 2023

Reverse Circulation (RC) drill holes assayed: The first 17 RC drill holes of the Phase 1 drill program are all Rare Earth Element (REE) mineralized.

Key Points: 
  • Reverse Circulation (RC) drill holes assayed: The first 17 RC drill holes of the Phase 1 drill program are all Rare Earth Element (REE) mineralized.
  • "These exceptional drilling results have confirmed the potential of Target IV," stated Stephen Burega, president.
  • The PCH Ionic Clay Project drilling has resulted in 17 holes with a weighted average value of 1,566 ppm TREO, which is comparable to, or surpasses, other well-known international deposits.
  • Target IV marks a significant milestone for Appia's PCH Ionic Clay project, and the Company eagerly anticipates receiving further assay results from the SGS Geosol labs.

Calibre Continues To Expand Zones of High-Grade Gold Mineralization within the Limon Mine Complex; Initial Results Include 9.67 g/t Gold Over 13.3 Metres and 8.94 g/t Gold Over 10.1 Metres

Retrieved on: 
Tuesday, September 12, 2023

These high-grade intercepts continue to demonstrate the resource expansion potential at the Limon Mine complex.

Key Points: 
  • These high-grade intercepts continue to demonstrate the resource expansion potential at the Limon Mine complex.
  • Key elements of the QA/QC program include verifiable chain of custody for samples, regular insertion of certified reference standards and blanks, and duplicate check assays.
  • Prior to analysis, samples are prepared at Veritas' Managua facility and then shipped to its analytical facility in Vancouver, Canada.
  • For greater precision of high-grade material, samples assaying 10 g/t Au or higher are re-assayed by fire assay with gravimetric finish.

Calibre’s 2023 Exploration Drill Program Along the Panteon VTEM Corridor Yields Multiple New Exciting High-Grade Discoveries in Untapped Regions; Additional Drilling Intersects 15.64 g/t Gold over 2.5 metres and 31.30 g/t Gold over 1.4 metres

Retrieved on: 
Tuesday, July 18, 2023

These new intercepts continue to demonstrate the potential of the multi-kilometre long structure identified by our 2022 VTEM geophysical survey .

Key Points: 
  • These new intercepts continue to demonstrate the potential of the multi-kilometre long structure identified by our 2022 VTEM geophysical survey .
  • Today’s results are located along the west side of the VTEM corridor, proximal to and extending approximately two kilometres from the high-grade Panteon North project.
  • New drill intercept highlights along the Panteon VTEM Geophysical Gold Corridor include:
    March 21, 2023 intercepts along the Panteon VTEM Geophysical Gold Corridor and Panteon North:
    17.45 g/t Au over 4.1 metres ETW including 38.45 g/t Au over 1.8 metres ETW in Hole LIM-22-4736;
    29.68 g/t Au over 4.3 metres ETW in Hole LIM-22-4724.
  • Note: Estimated True Widths for reported vein intercepts are based on 3D models of the individual veins.

Arras Minerals Reports First High-Grade Gold and Silver in Grab Samples From the Elemes License

Retrieved on: 
Tuesday, July 11, 2023

Arras Minerals License Package (Pavlodar, Kazakhstan)

Key Points: 
  • Arras Minerals License Package (Pavlodar, Kazakhstan)
    A summary of grab samples with over 5.0 g/t gold announced in this news release is outlined in the table below.
  • Location of the Soviet-era trenches re-sampled by Arras at the Karagandy-Ozek project, Elemes license, showing gold assays (g/t) for the grab samples.
  • Location of the Soviet-era trenches re-sampled by Arras at the Karagandy-Ozek project, Elemes license, showing silver assays (g/t) for the grab samples.
  • Location of the Soviet-era trenches re-sampled by Arras in the northern zone of the Karagandy-Ozek project, Elemes license, showing gold assays (g/t) for the grab samples.

Surge Copper Provides Berg Area Reconnaissance Exploration Results, a Round-Up of the 2022 Exploration Program and Announces 2023 Initial Exploration Plans

Retrieved on: 
Wednesday, April 19, 2023

The Sylvia Target contains known porphyry copper style mineralization associated with a one kilometre long intrusion within a mostly covered area.

Key Points: 
  • The Sylvia Target contains known porphyry copper style mineralization associated with a one kilometre long intrusion within a mostly covered area.
  • In 2022 Surge conducted 6 IP lines over the target along with soil and rock sampling, mapping, and drilled 2 holes.
  • The sample returned 4.3 g/t gold, 4,150 g/t silver, and 2.99% copper and highlights a key area for follow-up work in 2023.
  • The Company is currently planning a 2023 exploration program at Ootsa and Berg with further details to be announced prior to the commencement of the program.

Calibre Continues to Expand the New High-Grade Gold Discovery at Panteon North & Along the Multi-Kilometre VTEM Gold Corridor; Additional Drilling Intersects 17.45 g/t Gold Over 4.1 Metres Following Up on the December 2022 Intercept of 11.61 g/t Gold Over

Retrieved on: 
Tuesday, March 21, 2023

These new intercepts continue to demonstrate the potential of the multi-kilometre long structure identified by our 2022 VTEM geophysical survey released on December 8, 2022 (see news release here ).

Key Points: 
  • These new intercepts continue to demonstrate the potential of the multi-kilometre long structure identified by our 2022 VTEM geophysical survey released on December 8, 2022 (see news release here ).
  • Today’s results are located more than 2 kilometres north of Panteon North which has had numerous bonanza grade gold intercepts to-date as evidenced in our most recent press release here .
  • Prior to analysis, samples are prepared at Veritas' Managua facility and then shipped to its analytical facility in Vancouver, Canada.
  • For greater precision of high-grade material, samples assaying 10 g/t Au or higher are re-assayed by fire assay with gravimetric finish.